• Archer Albright posted an update 3 years, 8 months ago

    An enhancing molding serves as a any continuous projection utilized to enhance the appearance of a wall. In ancient Greece, these folks were first employed to throw water out of the wall. The contours, measurements, and projections of moldings vary greatly.

    Frieze

    One kind of molding – the frieze (or frieze board) – was basically applied to the Parthenon on the Acropolis. The frieze is considered an element of the Greek architectural style.

    The Parthenon was built for the goddess Athena. The frieze moldings that have been used were meant to tell the tale of her overcome Poseidon in becoming the patron with the ancient city that is now Athens.

    The frieze panels certainly are a number of designed pediments which can be full of the pictures of Athena’s birth and rise to power. Today, a frieze board will be the flat panel just below a crown molding or cornice. Often, low relief is used to the panel for really decoration.

    Today, frieze moldings are most typical as being a part of an attractive molding that follows the neoclassical architecture or decorating style.

    You need a pretty high ceiling (at least 9 feet), and it is a good idea to stain or paint the frieze as well as the crown molding the same color. The frieze is a good approach to visually bring the ceiling down and make the space appear cozier.

    Crown Molding

    Crown molding is among the most popular type of cornice molding. Crown molding generally is a single-piece of decorative molding, installed at the top of a wall, in an angle on the adjoining ceiling. However, I have come across crown molding assemblies of 5 or higher pieces in many elaborate settings.

    Crown molding often features a profile that projects out on the ceiling and along the wall, adding a refreshing appearance to some room. It is usually used near the top of cabinets or built-in furniture.

    Introducing this type of decorative molding into a relatively simple room gives a historic character that this room would not otherwise have. Crown molding can also be used in combination with other moldings to provide details to fireplace mantels and shelves. (For what it’s worth, this might be my personal favorite architectural feature).

    Crown molding is often a type of Cornice Molding. The definition of "cornice" describes molding installed over the the surface of a wall or above of the question. When this treatment is produced from multiple bits of molding, stage system a "build-up cornice." The other kind of cornice molding could be the Cove Molding.

    Cove Molding

    Cove molding is very just like crown molding, with similar application and function. The difference backward and forward is within the profile. Cove molding includes a concave profile (which bows inward) while crown molding includes a convex (outward) profile.

    While crown is most in the home in traditional settings, Cove moldings are equally comfortable in country, and even contemporary settings. That you do not normally see multi-piece assemblies of cove moldings. You are able to occasionally find it "beaded" at bottom and top to get a little accent.

    Entries, formal living spaces, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.

    Kitchens and other more functional areas of the house could possibly be in places you will see the greater style of the cove molding. Over the years, coves and crowns have grown to be more compact, but a majority of still bear the styles and shapes of the original Greek and Roman designers.

    Chair Rail Molding

    A chair rail is often a decorative molding that divides a wall horizontally, usually about 32" to 36" over the floor. They protect the walls in locations where damage might occur from people waking up out of chairs.

    That is why, greater traditional chair rails will have a nosing inside the center, with curved and beveled surfaces that taper returning to the wall above and underneath the nosing.

    Today, chair rails remain a standard detail in traditional interiors. They serve the decorating aftereffect of unifying the many architectural information on a room, such as door and window trim, and fireplace surrounds.

    Chair rail can also be used as being a cap for wainscoting or any other wood paneling. This decorative molding adds feeling of detail and charm while achieving continuity in a room by unifying various decorative elements.

    Panel Molding

    Panel molding, commonly termed as a picture frame molding, appears to be a large empty frame, and is often part of designs on walls of old Colonial and, Georgian, and Early American homes. The location on this molding should be above the chair rail height and about 10 to 12 inches down from the ceiling.

    How big this sort of decorative molding, measuring 1" to 3" wide, ought to be proportionate to the ceiling height with the room. Much like the other moldings, panel molding adds feeling of charm and delicate detail into a room.

    Wall framing appears at the Georgian time period of American architecture, when plaster began to replace wood panels for the walls. Panel molding also is a fantastic way to divide walls into large, eye appealing units, with no same expense of full wall paneling.

    Another using this versatile molding is usually to trim openings made by wider planks that are assembled as rails and styles. Often, the centers of these frames are still open. By applying panel moldings throughout the perimeter with the opening, you develop the appearance of a photo frame.

    When this decorative molding is painted within the same color since the surrounding walls, you accomplish a sculptural quality to some wall, adding texture and shadows. If moldings are painted in contrasting colors, they are able to develop a striking 3 dimensional appearance, giving depth and dimension. Such a treatment methods are popular for staircases and entries.

    Baseboard & Base Molding

    Baseboard molding protects the bottom of the wall from ware and tear, while hiding openings and other irregularities the place that the wall meets the floor. Base moldings give the floor line a better profile, and could be as elaborate or simple as you like.

    Whereas it really is relatively simple to setup chair rail on a level plane, baseboard (like crown) could be tricky if the floors (or ceilings) usually are not level. That is why, I propose finding a professional woodworker for the installation of these moldings.

    Jointly remedy to uneven floors, you can use a "shoe molding" across the bottom front edge to give the baseboard a finished look. Something more important that can be done with baseboard (in addition to together with the toe kick of the kitchen cupboards) is incorporate accent lighting.

    This is simply not commensurate with the pure traditionalist, yet it’s a pretty nifty approach to have accent lighting throughout the perimeter of your room. You couldn’t make this happen until they created the small LED rope lights of today.

    Rope lights are available in different lengths and shades, and can be easily installed behind baseboard. Just be a notch from the back side from the baseboard, at the pinnacle, and run the rope lights into the notch.

    This is often found in commercial spaces, but has become added in entries and hallways – especially in contemporary homes.

    Flexible Moldings

    If you have a curved wall or arch, you are able to probably have an excellent craftsman build a curved molding for around 3 x the expense of an upright molding. Or, you should buy a versatile molding for about the same price because straight one.

    These permit you to install moldings onto curved surfaces or arches, without the delay and worth of getting them to created from wood. The stock profiles (you will find hundreds) are similar towards the rigid versions and they’re compatible so far as paint finish can be involved.

    To get more information about
    ecomoulding check this popular web portal.