How to choose a forklift truck

Locating the perfect forklift to your customers are not always easy. Knowing what you may need, and why, is very important.

That’s why we’ve designed a simple product filtering tool that may help you select forklifts that fit your particular operational needs.

Just select a few answers in the fill-in fields for top level equipment in your case!

Nonetheless, listed below are seven criteria that will help you to choose the perfect forklift that will meet your operational needs:

Workplace

Will the forklift work indoors, outdoors or both?

Outdoors

Restrictions in many countries imply that Diesel trucks can only provide outside.

Counterbalanced forklift trucks are usually recommended outdoors, often within a four-wheel configuration because this could be more comfortable for the driver and thus increase productivity.

Indoors

If you are searching at indoor applications, electric or manual forklift trucks are often the best option.

Warehouse equipment such as reach trucks, pallet trucks and stackers are meant for indoor work, and aren’t usually recommended for use outdoors because of the wheel type and limited ground clearance.

Mixed use

For any blend of inside and outside use, three and four-wheel electric counterbalanced trucks are likely to be the best option.

Always keep the dimensions of the running area at heart. Stand-on trucks tend to be suited to narrow working areas. When you have plenty of room, consider an electric or IC (car) truck.

Power supply

Your choices of forklift power supply are manual, electric, Diesel or LPG.

Which is likely to be best will depend on where your forklift trucks are widely-used, the distances they must travel, the level of use, the significant environment along with the loads they are going to carry.

For brief distances transporting low weights and for occasional use, a handbook forklift are occasionally best. For heavier work, outside and inside, an 80-volt electric or IC truck will be the answer.

Level of use

Will truck use be low, average or high?

The intensity of use will decide whether forklift trucks should be manual, electric or car (IC), and it’ll decide what amount of performance you need.

For low intensity use, manual and small pedestrian electric trucks in many cases are suitable. In average use situations, medium to light electric trucks will do. For heavy use applications, the most beneficial option would be an 80-volt electric or IC truck.

Operation

In operational terms, you have a selection of manual, seated or stand-on forklift trucks.

Which of those you will need is determined by the power of use, space to manoeuvre and drive distance.

If the forklift will probably be handling light weights and used occasionally, then the manual/pedestrian option will likely be fine.

For average drive distances and areas with only a little space, a stand-on truck would usually be best.

In case you are coping with longer distances in locations which there is certainly more room to manoeuvre, a three or four-wheel electric or IC truck could be the answer. The IC option is acceptable only where there is sufficient ventilation, or if perhaps the truck has been used outdoors.

Also believe about how some of the truck operator should leave your vehicle. If your driver leaves the car often, a stand-on truck will be more practical and ergonomic. If your operator needs to exit a power forklift truck 50 times each day, the constant entering and exiting will put a stress on ligaments, joints and muscles.

Driving distance

Focusing on how far each forklift truck will have to travel each day is very important:

For brief distances, think about pedestrian pallet truck or stacker.

For medium distances, a stand-on truck a treadmill which has a foldable platform that can do both may be best.

For too long distances, you will need take a seat models that can cover ground more quickly and they are made for this use.

Maximum lift height

It’s necessary to have in mind the heights in all of the areas that this forklifts is going to be operating, including any doorways, entrance areas or storage spaces where they should be used.

You additionally must think about the heights that you need trucks to achieve to. This will determine whether horizontal transport, a pedestrian or stand-on pallet truck is better. If lift heights are approximately 3 or 4 metres and also the usage intensity is limited, a stacker could be fine.

For greater heights, a counterbalanced truck or reach truck would be best, depending on the aisle widths available and whether it’s working indoors or out. For applications over six or seven metres, you need a reach truck.

Load weight

For no-lift, short distance operations where loads will almost always be below 1000kg, support pallet truck may very well be recommended.

For lifting, longer distance or more load bearing requirements, you simply must have a look at motorised models. For heavier loads, a greater performance truck will probably be needed.

More info about xe nang check this web portal